The Hi-Velocity System is a complete home comfort system. Classified as an SDHV (Small Duct High Velocity System), our high pressure forced air delivery mini duct system can be designed to provide heating, cooling, filtration, ventilation, and dehumidification.   The Hi-Velocity System has been pre-engineered and works on the principle of pressure rather than air velocity.

 
How does the Hi-Velocity System Compare to a Conventional System?

Our system is quite different than a conventional furnace, one of the main differences being that the supply duct work is all "small diameter" or "mini duct", which is much more adaptable and does not place the same strict limitations on architects and builders. With a pressurized small diameter duct we condition the air differently than conventional forced air systems. Pressure is created in the smaller supply ducts and converted to velocity at the outlets utilizing the Venturi Effect, which eliminates dust build-up within the duct work.  With continuous air circulation from the constant fan, airborne dust and other allergens can be easily filtered out of the air. With the use of a high pressure area to low pressure area, we continuously mix the room air, creating even temperatures from floor to ceiling.  Equal air flow to all of the outlets results in unmatched air delivery, and a draft free environment that eliminates hot and cold spots normally associated with conventional systems.

 
Is Zoning a possibility with Hi-Velocity Systems?

Energy Saving Products Ltd. is proud to offer the HE-Z Zoning Ready Air Handlers. HE-Z is unique in the SDHV Industry because it is a true “Energy Saving Zoning Control System”,  compatible with most forced air zoning packages. The WEG controller is pressure reactive and will change the energy input to maintain constant CFM flow of open outlets from 150cfm to 1250cfm, eliminating the need for by-pass dampers. Now available with multiple collars (2, 3 or 4) with zone controls, dampers and actuators pre-installed.

 
Can the Hi-Velocity System provide dehumidification? 

The Hi-Velocity System is a complete home comfort system, which can be used for heating, cooling, ventilation, dehumidification, or a combination of all. It is important to maintain the proper humidity levels in your home and workplace.  Humidity that is too high will stain ceilings and walls, and can cause paint and wallpaper to peel.  It is also a breeding ground for mould, rot and insects such as termites and cockroaches. Our Cooling Modules are highly efficient and very effective at removing moisture from the air. Not only do we cool the air, we use a lower air velocity which allows the Hi-Velocity System to remove more moisture from the passing air molecules. This can result in a 30% drop in humidity levels, leaving a constant and comfortable temperature on the skin surface. 

Whether it is your first house or your dream home, the Hi-Velocity System is the right choice for cooling and heating. Don’t reduce your livable area with large duct runs when small round plenum and flexible ducts can be run through floors, walls and ceilings. Not only will you improve your living standards with the Hi-Velocity System, you’ll save space allowing you to enjoy your new home that much more.

Many home builders and building contractors are utilizing our specially designed Builders Series for multi-family structures. This cost-effective air handler can be ordered for large projects at a discounted price. Units come with an unpainted galvanized steel casing, and can come with or without zoning controls. With the adaptability of this unit, builders can save hundreds of hours of installation time on a single multi-family project.

The retrofit market is booming with people buying beautiful older homes and updating them to today’s standards. In older homes upgrading the heating and cooling system, there is no better choice than the Hi-Velocity System. The small ducts are easy to pull through walls, floors and ceilings with very little changes to the existing structure.

In commercial applications, exposed plenum with drilled outlets is the ideal choice. Drilled outlets are commonly used to supply a large area with heating and cooling. They can also create a pressurized air curtain for bay doors or large openings to the outside environment.

 
What options are available for Heating/Cooling?

The HVS Series Variable Speed Heat Pump, available in 2, 3 and 5 Ton, uses less energy than a conventional heat pump by modulating the compressor/fan speed up or down to match load. Inverter Drive technology allows for capacity modulation as low as 20%. The Variable Speed Compressor allows for zoning with true efficiency, while greatly reducing noise. Side discharge design fits tight spaces. Matches easily with our Hi-Velocity System or 3rd party air handlers.

Boilers, Dual Purpose Hot Water Heaters, Heat Pumps, and Geothermal Systems can all be used as heat sources with our coils. We also manufacture a Slide-In Electric Module for the system, that is easily installed without any external mounting or duct work required.
Chillers, Condensing Units, Geothermal Systems, and Heat Pumps can all be used as cooling sources with our coils. The high pressure distribution network cools each level of a structure evenly. Use of a lower CFM across our cooling coils ensures a larger amount of humidity is removed from the air, for increased comfort.

  
Can the Hi-Velocity System work with my existing air ducts?

The Hi-Velocity System is designed to use small diameter ducts and will not operate correctly with larger duct systems. Our LV-Z Series Air Handlers however, are designed to work in place of a conventional system, utilizing existing duct in the home. Perfect for new construction or retrofit applications, the LV-Z is a forced air system, utilizing highly efficient Variable Frequency Drive Technology. In place of an old and out-of-date furnace, this new unit can save you time, money, and energy.